Main Products
- Phosphonates Antiscalants, Corrosion
Inhibitors and Chelating Agents - Salts of Phosphonates
-
- Tetra Sodium Salt of 1-Hydroxy Ethylidene-1,1-Diphosphonic Acid (HEDP•Na4)
- 2-Phosphonobutane -1,2,4-Tricarboxylic Acid, Sodium salt (PBTC•Na4)
- Penta sodium salt of Amino Trimethylene Phosphonic Acid (ATMP•Na5)
- Hepta sodium salt of Diethylene Triamine Penta (Methylene Phosphonic Acid) (DTPMP•Na7)
- Potassium Salt of HexaMethylene-DiamineTetra (MethylenePhosphonic Acid) HMDTMPA•K6
- More
- Polycarboxylic antiscalant and dispersant
- Biodegradable antiscalant and dispersant
- Biocide and Algicide
- Built Scale & Corrosion Inhibitors and Pretreatment Filming Agents
-
- DT-907 Non-P Scale&Corrosion Inhibitor
- DT-503 Scale and Corrosion Inhibitor for Boiler
- DT-503B Scale and Corrosion Inhibitor for Boiler
- DT-504 Scale and Corrosion Inhibitor for Heating Water
- DT-601 Scale and Corrosion Inhibitor for Iron & Steel Plant
- DT-604 Scale and Corrosion Inhibitor for Power Plant
- More
- Corrosion Inhibitor
- Oxygen Scavenger
- Reverse Osmosis Chemicals
- Cationic Surfactant
- Other
ZAOZHUANG DONGTAO CHEMICAL TECHNOLOGY CO.,LTD
TEL: +86-632-3175589
FAX: +86-632-3175589
Mobile:: +86-15665215760
Contact: Cary Hou
E-mail: cary@dtchemical.com
Contact: Edward Zhang
E-mail: edward@dtchemical.com
ADD: Building 9,Lunanshuicheng,Middle Xichang Road, Shizhong District, Zaozhuang City, Shandong Province,P.R.China
Non-P Scale & Corrosion Inhibitor DT-907
Properties:
DT-907 is non-p scale & corrosion inhibitor, is good for strict limit region of phosphorus drainage, can decrease treating fare of waste water. Because of non-p, it can decrease growth of microbe, thus decrease dosage of bactericide and removeing sludge agent.
Specification:
Items | Index |
---|---|
Appearance | Dark amber solution |
Solid content % | 30.0min |
pH(1% solution) | 2.0-3.0 |
Density(20℃)g/cm3 | 1.10min |
Usage:
(1)DT-907 dosage is 30mg/l,has excellent corrosion inhibiting effect of water whose hardness is around 100mg/l,alkalinity around 100mg/l,and corrosion rate of carbon steel is less than 0.075mm/a.
(2)DT-907 dosage is 30mg/l,has excellent corrosion inhibiting effect of water whose hardness is around 300mg/l,alkalinity around 200mg/l,chloride more than 300 mg/l, and corrosion rate of carbon steel is less than 0.075mm/a.
(3)DT-907 dosage is 60mg/l, has excellent corrosion inhibiting effect of water whose hardness is around 50mg/l,alkalinity around 50mg/l.
(4)DT-907 can make formulation with other chemicals to decrease dosage of it.
(5)The best dosage of DT-907 is 40-60mg/l.
Package and Storage:
200L plastic drum,IBC(1000L),customers’ requirement.
Safety protection
Acidity, avoid contact with eye and skin, once contacted, flush with water.